-40%

TO-18 808nm 200mW 5.6mm Metal Red IR Laser Diode 2-2.2V light-emitting diode

$ 0.52

Availability: 36 in stock
  • Configuration: Single
  • Number of Pins: 3
  • Type: Individual Item
  • Wavelength: Infrared
  • Nominal Voltage: 2.2v
  • Brand: Unbranded
  • Country/Region of Manufacture: China
  • Nominal Current Rating: 350 mA
  • Condition: New
  • Number of LEDs: 1
  • IR Qty: 1PCS

    Description

    808nm 200mW 5.6mm Metal Red IR Laser Diode 2-2.2V TO-18 light-emitting diode
    DESCRIPTION
    Material:Metal
    Size: about 1.1cm/0.433"
    [Conversion: 1.1cm=
    0.433
    inch, 1inch=2.54 cm]
    Wavelength: 808nm
    Power Output: CW 200mW
    Working Current: I<350mA
    Working Voltage: 2.2V
    Sealed Size: TO18 (5.6mm)
    Lifespan:>10000 hours
    Attention:
    1.Laser beam is harm for eyes during process please avoid any directly see on the aperture.
    2.Please use the suitable LD power driver, instant reverse current can not exceed than 25uA
    reverse voltage cannot exceed than 2V,otherwise the LD will be damaged.
    3.Please install the LD well before connecting to the power.The initial input voltage should be zero.
    4.To increase/ decrease the current gradually for avoiding any current pulse which will damage the LD.
    5.Please store or use the LD under dry and air flow ambient.To avoid any situation of condensation which will damage the LD.
    6.Working under high temperature will increase the threshold current and decrease the efficiency conversion,speed up the aging of the LD.
    7.The exceed power output will speed up the aging of the LD.
    8.To use the LD with enough head dispensing or uner the cooling ambient.
    9.Laser diode belongs to electrostatic sensitive components. Should deal with anti-electrostatic method.
    To touch the LD directly unless humanbody is well connect with ground. Otherwise the LD will be burned easily.
    To wear anti-eletrostatic wrist for band is necessary.
    Package Included:
    1 x 808nm 200mW Laser Diode