Performance Tool W86552 2-Piece Valve Lapper Set

Description

HARDWOOD HANDLE: Durable and comfortable use in any garage or tough worksite
HEAVY DUTY RUBBER: Suction cups are strong enough for repeated use
IDEAL USE: Combine a lapping compound (not included) to lap valves to match valve seats
LARGE LAPPER SIZES: 1 1/8" and 1 3/8"
SMALL LAPPER SIZES: 5/8” and 3/16"
From the manufacturer
Features
Includes six sizes of bands for multiple applications.
Installs and removes piston rings 3/64" through 1/4".
Use to install pistons on most passenger cars.
Use to install pistons on most passenger cars.
Low friction wrinkle band fits 3" to 5" pistons.
Cleans carbon and deposits from ring grooves.
Sizes SAE: 2 7/8 to 3 1/8", 3 1/8 to 3 3/8", 3 3/8 to 3 5/8", 3 5/8 to 3 7/8", 3 7/8 to 4 1/8" and 4 1/8 to 4 3/8".
Comfortable vinyl grip handles.
Positive compression and adjustable friction brake.
Positive compression and adjustable friction brake.
Adjust only once for all pistons.
Includes two 5 cutter wheels for a total of 10 groove cleaning sizes.
Sizes Metric: 73 to 79mm, 79 to 86mm, 86 to 92mm, 92 to 98mm, 98 to 105mm, 105 to 111mm.
Prevents damage to the ring or pistons
Band Diameter Sizes: SAE 2 1/8 to 5" (Metric 53 to 127mm)
Band Diameter Sizes: SAE 3 1/2 to 7" (Metric 88 to 177mm)
Easy to use.
Sizes SAE: 1/16, 5/64, 3/32, 1/8, 5/32, 3/16 and 1/4" Metric: 1.5, 1.75 and 2mm
Features
Adjustable honing tension.
Replacement stones for W80560.
Used to clean small tubes, pipes and other hard to clean areas
For proper removal or secure lock down of the fuel pump retaining ring.
Applications include most GM vehicles and 1.7 to 2.2L Chrysler 1978 to present.
2" to 7" diameter range (50.8-177.8mm).
Nylon, brass and stainless steel brushes for various surfaces
Reduces the chance of damaging fuel tank, fuel pump or retaining ring.
Tips store in handle or plastic boot.
2" through 4" and 4" through 7" settings.
Sizes: 1/4", 3/8", 1/2", 5/8", 3/4" and 1"
Offset coated handle for sure grip and easy use.
11 1/2" flexible shaft.
Features
Compresses springs on the vehicle without removing head.
Conveniently removes valve springs on most cars and light trucks without removing cylinder head.
Fits 14mm & 18mm spark plug holes, and 1/4-NPT air hose.
Service overhead valve components without removing head.
Compresses valve springs without removing head.
Valve Spring Compressor
Adjustable cam handle keeps tool correctly adjusted for entire job.
Offset jaws easily grip and compress valve springs.
Allows service of overhead valve components without removing head from engine block.
Contains one 14mm and one 18mm fitting.
Allows access for service to most valve train components.
Includes small and large jaws for multiple applications.
Remove lever and turn with socket in confined areas.
Requires Flexible Air Valve Holder (Performance Tool W84003) and Air Hold fittings (Performance Tool W84005) to keep valves from dropping into cylinders when keepers are removed.
Use in conjunction with Valve Spring Compressor (Performance Tool # W84001 or W84002).
Use with valve spring compressor Performance Tool # W84001 or W84002.
For GM 8 cylinder engines and others with stud type rocker arms.
10" Max Jaw Opening
Features
Use with Lapping Compound (not included) to lap valves to match valve seats.
Use with Lapping Compound (not included) to lap valves to match valve seats.
Use with Lapping Compound (not included) to lap valves to match valve seats.
Collet expands to tightly grasp hydraulic valve lifter allowing for easy removal.
Fits 1998 and later VW / Audi head bolts
Heavy duty rubber suction cups.
Heavy duty rubber suction cups.
Large - 1 1/8" and 1 3/8"
Specially designed slide hammer easily frees tight or stuck lifters.
125mm overall length to fit restricted areas.
Hardwood handle.
Hardwood handle.
Sizes: Small - 5/8 & 3/16"
Knurled handle for secure grip.
Not for impact use
FEATURES
Sizes: 6, 8, 10 & 12 mm
Size: 8mm
Size: 10mm
Size: 12mm
22 two step ground blades.
Hardened and tempered high quality steel blades.
FEATURES
Heat treated alloy steel.
Heat treated alloy steel.
Heat treated alloy steel.
Heat treated alloy steel.
Decimal and metric sizes.
Marked in both standard and metric sizes.
FEATURES
1/2" hex drive shaft.
1/2" hex drive shaft.
1/2" hex drive shaft.
1/2" hex drive shaft.
Blade protector has thumb notch to aid in removal of blades
Knurled lock nut for easy blade selection.