LED Dimmer - 12 volt - Panel / Dash mount with on/off switch 12V DC 6V 24V

Description

LED ADJUSTABLE DIMMER FOR  6, 12, and 24 VOLT LED LIGHTING
Brand new!
This LED Dimmer is used on 6 through 24 volt systems to dim your leds, it also has an on/off switch all on one knob!  Included is the vinyl decal shown in picture. The trim washer and mounting nut is also included. Simple three wire connection, just connect to your LED's and to your battery power. Instructions included.
Your pre-wired LEDs and LED circuit boards must already be set up to run on 12 volts, the dimmer will lower the voltage to dim the leds to your desired level. The dimmer can be used on other voltage levels from 6 to 24 volts as long as the LEDs are configured to be driven from that voltage. Example: A 6 volt tractor can use this dimmer as long as the LEDs are designed to run on 6 volts. You will typically lose about 1~2 volts from input to output between the dimmer. Due to various forward  voltages (Vf) of different LED colors, the LEDs may dim different from color to color.
All of our pre wired LEDs and our circuit boards will work just fine with this unit.
Details:
* Input voltage: 6~24 Vdc (see notes)
* One Amp capacity (1000mA)
* Integrated on/off switch
* Internal fuse - self resetting, just turn power off for 30 seconds to reset, better than glass inline fuses!
* Vinyl decal, mounting nut and trim washer included
* Heave duty construction
* Size: 1.9 inches wide / 1.3 inches tall / 0.75 inches thick
* Can also be used to dim incandescent light bulbs and small DC motors.
Made in USA