8mm Coloured LED Light Bulb Emitting Diode Red White Blue Yellow Green

Description

LED Light Bulb Emitting Diode
LED installation method:
(1) Pay attention to the arrangement of external wires for various devices to prevent incorrect polarity installation. The device should not be too close to the heating element, and the working conditions should not exceed their specified limits.
(2) Be sure not to install LEDs with deformed pins.
(3) When deciding to install in the hole, calculate the size and tolerance of the hole spacing on the face and circuit board to avoid excessive pressure on the bracket.
(4) When installing LEDs, it is recommended to use guide sleeves for positioning.
(5) Before the welding temperature returns to normal, it is necessary to avoid any vibration or external force on the LED.
LED welding conditions:
(1) Solder iron welding: The tip temperature of the soldering iron (maximum 30W) should not exceed 280 ° C; The soldering iron must be grounded and static electricity must not exceed the range; Welding time shall not exceed 3 seconds; The welding position should be at least 3 millimeters away from the colloid.
(2) Immersion welding: The maximum temperature for immersion welding is 260 ° C; The immersion welding time shall not exceed 3 seconds; The immersion welding position should be at least 3 millimeters away from the colloid.
P
a
ckage Including:
According to your choice.
ABOUT US:
Good quality. Buy with confidence!
We maintain high standards of excellence and strive to satisfy customers!
If you have any questions, please feel free to contact us at any time.
On Dec 26, 2023 at 00:08:47 PST, seller added the following information: